Generic filters
Exact matches only
FS Logoi
thyssenkrupp Steel Europe orders 195 self-recuperative burners from WS Wärmeprozesstechnik

thyssenkrupp Steel Europe orders 195 self-recuperative burners from WS Wärmeprozesstechnik

Kategorien: |
Autor: Redaktion

Datum: 03. Mai. 2021

03.05.2021. Within the scope of a modernisation project, thyssenkrupp Steel Europe AG will upgrade the combustion system of the FBA 8 galvanising line, which is located at the Dortmund plant. The newly implemented heating system will provide drastically lower emissions. The purchase order for delivery, assembly and commissioning of 195 modernised self-recuperative burners has recently been placed with WS Wärmeprozesstechnik GmbH.

The heating system will achieve exceptionally low NOx emissions due to proven double P-tube design and the patented FLOX® combustion process. The retrofit is to be completed by mid 2022. Detailed planning will keep line down time to a minimum for the duration of the retrofit.

Combustion technology is ready for a future with green combustion gases

In the future, the tkSE plant in Dortmund will operate three vertical strip lines, positioning it as one of the most advanced and modern sites for annealing and surface treating of steel strip globally. Up to 2,000,000 t/a of steel can be processed, once all three lines are in full operation. tkSE employs and fully relies on proven and environmentally friendly heating technology. A technology that even today is suitable for a future with green combustion gases. After the conversion, approximately 800 low emissions burners will be in operation at the Dortmund facility.

WS can rely on decades of experience with the highly awarded FLOX® combustion technology. Experience gained from tens of thousands of burners successfully in operation worldwide. FLOX® enables highly efficient burners to operate while simultaneously maintaining very low NOx emissions.

“It is our ambition at WS, to provide solutions for all continuously operated strip lines which can reliably attain NOx emissions well below 100 mg/Nm³, with simultaneously high combustion efficiency over 80% and which are, already today, suited for a future with green combustion gases”, states Dr.-Ing. Joachim G. Wünning, President of WS Wärmeprozesstechnik GmbH.

 

(Source: WS Wärmeprozesstechnik)